Brass bearings

Brass bearings

Flat sliding bearings can be mounted by means of a bolt connection.  Flat sliding bearings which are mounted by means of a bolt connection can be used on sliding bearings to realize a slide where welding is not possible. 
If the temperature is higher than 200 ° C, and the built-in height is limited, there may be chosen for bearings in various bronze alloys with graphite. The temperature range extends to approximately 450 ° C, depending on the load per mm ². The bearing is easy to place, and is connected by means of bolts on the structure. The bearings are supplied without the required counter bearing.

Connection:
Installation heigth: 

Shape:
Material: 
Surface:  

            Bolted
10 or 20 mm. 
Other heights on request 
Rectangular , round on request
Depending on load and temperature, various alloys can be used
Non


brons rond

 

We provide round flat sliding bearings applicable at the spring support Lisega type plate 28 and 29. 
These bearings are used where the temperature is too high for the standard used PTFE bearings and are suitable for contact temperature up to 450 ° C.
Fixation by means of a bolt connection.

 

Artikelen 1 tot 9 van 17 in totaal

per pagina
Pagina:
  1. 1
  2. 2

Foto-tabel  Lijst 

Van hoog naar laag sorteren

Artikelen 1 tot 9 van 17 in totaal

per pagina
Pagina:
  1. 1
  2. 2

Foto-tabel  Lijst 

Van hoog naar laag sorteren